The automatic multi-function incubator researched and produced by our company uses the more popular microcomputer-based technology (using the latest micro-electronics technology and new components), equiping with the imported digital temperature sensor and France moisture sensitive capacitance humidity sensor, which makes this instrument miniaturization, intelligent, high measurement accuracy. This incubator is stable and reliable, time-saving, labor-saving, and easy-to-use. It is the ideal incubation equipment for propagation of poultry and rare birds and small and medium-sized hatchery.
Main Technical Index:
1.Temperature Measuring Range: 0-99℃
2.Temperature Measurement Accuracy: ±0.1℃
3.Humidity Measurement Range: 0—99%RH
4.Humidity Accuracy: ±3%RH
5.Number of signal-output: 7, (over-temperature, temperature control, insufficient temperature, egg left-turning, egg right-turning, humidity control, alarm)
6.The maximum output load current: temperature control, insufficient temperature ≤ 8A/AC220V, over-temperature, egg left-turning, egg right-turning, humidity control, alarm ≤ 1A / AC22
7.Number of egg-turning: the maximum record is 999 times.
8.cycle of egg-turning: adjustment of 0 – 999 minutes (the factory default is 90 minutes)
9.egg-turning time: adjustment from 0 to 999 seconds (the factory default is 180 seconds)
10.ventilation cycle: from 0 to 999 minutes
(the factory default is 120 minutes)
11.ventilation time: from 0 to 999 seconds (the factory default is 30 seconds)
12.Temperature measurement length: About 2 meters

Working Condition:
1.Working Voltage: AC 160V - 240V，50HZ
2.Relative Humidity: less than 85% RH
3.-10℃ - 60℃

Dear Users:
Hello!
Welcome to use our automatic incubator by computer!
Please pay attention to the following aspects in use:

• The micro-computer controller has been made adjustment for temperature, humidity, egg-turing, exhaust, etc. before leaving factory, which meets settings required by incubation. Under normal circumstances, you do not need to set up and may use it by connecting the power supply. Factory settings: temperature 38 ℃, humidity 60% RH; cycle of egg-turning: 90-minute, time of egg-turning: 180 seconds; ventilation cycle: 120 minutes; ventilation time: 30 seconds; egg-turning state: automatic egg-turning.

• If you need only to change the temperature and humidity parameters, please refer to Section III in page 2 of this Manual. Please do not set up other parameters in order to avoid operation errors which may affect your usage and bring you f unnecessary losses.

• Temperature and humidity sensors are made of high precise and micro-molecular materials, please do not make the sensor come into contact with the water directly. The dust must be regularly cleared on the surface of the sensor, or it will affect the measurement accuracy.

• The manufacturer should only assume the obligation for products selled to users, but not undertake users’ other losses caused by product failure.